Hulling, isolerhållare KI-10

1,08 kr inc. VAT, excl. shipping
(0,87 kr excl. VAT and shipping)
MAG-RWL-KI-070

Skickas ut inom ung. 5-7 arbetsdagar efter mottagandet av din betalning

+

Lägsta antalet för "Hulling, isolerhållare KI-10" är 1.

Features:
Hammer insulation fixing with a plastic pin designed for embedding of Jointless Facade Thermal Insulation Systems.

Product features:

  • Product is recommended for installation of facade thermal insulation in concrete and solid brick (ETA) substrate;
  • Lowest embedment depth with maximum high performance parameters;
  • Shortest drilling depth – saves installation time;
  • Optimal technical parameters for detachment to ensure the safety of the product;
  • Polyamide pin design reinforced with glass fibre – allows fast and trouble-free installation in the expandable section of the expansion plug;
  • Optimal reduction of thermal bridge through the use of an additional plastic pin;
  • The possibility of using a fixing with an extra KWL insulation holding flange (recommended in the use of mineral-lamella wool);
  • Economical consumption through optimal product parameters

Material:

  • Plug Sleeve: impact resistant copolymer of polypropylene PP.
  • Nail Pin: polyamide PA 6.0 (Nylon) reinforced with fibre glass.

Installation recommendations:

  • drill diameter: 10 mm,
  • minimum embedment depth: ETA 25mm

Dedicated substrates

Application

Lenght [mm] Max. insulation
thickness [mm]
Package
[pcs]
70mm 40mm 250 Stk
90mm 60mm 250 Stk
120mm 90mm 250 Stk
140mm 110mm 250 Stk
160mm 130mm 250 Stk
180mm 150mm 250 Stk
200mm 170mm 250 Stk
220mm 190mm 250 Stk

 

Performance data for single anchor in tension without influence of edge distance and spacing

Substrate Concrete min. C16/20 Concrete C12/15 Solid brick Sand-lime solid brick Perforated ceramic brick Perforated ceramic brick (i.e. Porotherm) MEGA MAX Sand-lime hollow brick Lightweight concrete solid block Lightweight concrete hollow block Aerated concrete
Embedment depth hef [mm] 25 25 25 25 40 40 40 25 60 40 60
MEAN ULTIMATE LOAD NRu,m
KI-10 [kN] 0.70 0.78 0.72 0.89 0.74 0.57 0.67 0.96 0.78 0.75 0.25
CHARACTERISTIC LOAD NRk
KI-10 [kN] 0.50 0.50 0.50 0.60 0.40 0.40 0.30 0.60 0.50 0.40 0.10
DESIGN LOAD NRd
KI-10 [kN] 0.25 0.25 0.25 0.30 0.20 0.20 0.15 0.30 0.25 0.20 0.05
RECOMMENDED LOAD Nrec
KI-10 [kN] 0.18 0.18 0.18 0.21 0.14 0.14 0.11 0.21 0.18 0.14 0.04

 

Fixing type KI-10
Plate resistance [kN] 0.86
Plate stiffness [kN/mm] 0.50
Point thermal transmittance χ [W/K] 0.00

 

No posts found

Write a review

Kunder har också köpt Kunder har också köpt