Product filters vertical Product filters vertical

Insulation

How to insulate a house?

House insulation in general is made during a renovation or while construction. It reduces the heat losses in winter, prevents from cold air, but also prevents from overheating of the house during the summer.  What areas should be insulated? Of course exterior walls, but also floor, foundation, roof, partition walls, ceiling - all the weak points, where is threat of cold air getting in. On the market there are a lot of brands, that offer insulation products. We decided to offer proven quality products, from Polish manufacturers. You can choose between EPS, XPS, PIR boards or mineral wool. Of course should be noted, that each product should be chosen carefully due to it's properties and destination. For wall insulation it is λ (thermal conductivity) value important - the lower, the better. It tells how warm your house will be thanks to it. For floor or parking insulation compressive stress value is important - the higher, the better. This value tells how heavy load EPS board will handle.

Wide range of renders - from mineral ones to silicone-silicate renders together with facade paints allow to secure your walls insulation layer, but also will give your home elegant look. 400 colors to choose allow to create unique facade design.

To each type of insulation there are dedicated different mounting products - glue, pins, fibre glass net, primers. We offer all of them to complete your insulation system. Please find below our offer:

Atlas Stopter K-50 - 2 in 1 | white adhesive for fixing EPS, mineralwool boards and for mesh embedding
179,76 kr / 25 kg inc. VAT, excl. shipping (143,82 kr excl. VAT and shipping)
Atlas Stopter K-50 - VIP adhesive: White adhesive for external wall in thermal insulation. Proper for mineral wool and expanded polystyrene (white,...

Ships within 10-12 business days after receipt of your payment

+
Add to wish list

Insulation fixing KI-10N with metal pin and long expansion zone
ab 2,79 kr inc. VAT, excl. shipping (2,24 kr excl. VAT and shipping)
Features: Hammer insulation fixing with an insulated metal pin designed for embedding of Jointless Facade Thermal Insulation Systems. Product...

Minimum quantity for "Insulation fixing KI-10N with metal pin and long expansion zone" is 1.


Atlas SAH-E | thin–coat acrylic render available in 400 colours
ab 474,29 kr / 25 kg inc. VAT, excl. shipping (379,42 kr excl. VAT and shipping)
✔ Acrylic
Atlas SAH-E is a thin-coat render for the execution of the finishing coats with a decorative spotted texture. It is great solution for façades exposed to...

Insulation fixing KI-10M with metal pin
ab 1,71 kr inc. VAT, excl. shipping (1,37 kr excl. VAT and shipping)
Features: Hammer insulation fixing with a plastic pin designed for embedding of Jointless Facade Thermal Insulation Systems (BSO). Product...

Minimum quantity for "Insulation fixing KI-10M with metal pin" is 1.


Atlas SAH-N | thin–coat silicone render available in 400 colours
ab 810,08 kr / 25 kg inc. VAT, excl. shipping (648,05 kr excl. VAT and shipping)
✔ Silicone
Atlas SAH-N is a thin-coat render for the execution of the finishing coats with a decorative spotted texture. It is great solution for façades exposed to...

EPS Roof & Floor THERMO PLUS (CS ≥ 100 kPa)
ab 26,18 kr / m² inc. VAT, excl. shipping (20,95 kr excl. VAT and shipping)
✔ Width: 500mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.031 ✔ Compressive stress by 10% relative deformation: 100 kPa ✔ Euroclass E
EPS Roof & Floor Thermo+ is a highest performance expanded polystyrene for thermal insulation, produced from raw material containing graphite which...

Minimum quantity for "EPS Roof & Floor THERMO PLUS (CS ≥ 100 kPa)" is 1.


Adhesive ATLAS ROKER W | adhesive for fixing mineralwool boards
NEW
NEW
121,16 kr / 25 kg inc. VAT, excl. shipping (96,92 kr excl. VAT and shipping)
ATLAS ROKER W - adhesive mortar for the thermal insulation of walls and ceilings. fixing panels to ceilings (outdoors) underlying heated rooms -...

Ships within 10-12 business days after receipt of your payment

+
Add to wish list

Roof underlay Ventia Titanium Plus
ab 26,03 kr / m² inc. VAT, excl. shipping (20,82 kr excl. VAT and shipping)
✔ Width: 1500mm ✔ Length: 50000mm ✔ Basis weight: 190 g/m² ✔ Thickness: 750 μm ✔ Sd: 0.02 m
A high class diffusive roof membrane from Ventia line, weight of about 190 g/m2 and thickness of 750 μm, three-layered, above average resistance, high water...

Ships within 5-7 business days after receipt of your payment

+

Minimum quantity for "Roof underlay Ventia Titanium Plus" is 75.

Add to wish list

roof underlay VAXO
ab 10,92 kr / m² inc. VAT, excl. shipping (8,74 kr excl. VAT and shipping)
✔ Width: 1500mm ✔ Length: 50000mm ✔ Sd: 0.03 m
VAXO roof membranes VAXO membranes are a perfect solution for building a house. Thanks to its high vapor permeability ( Sd = 0.03 m ) they can be...

Minimum quantity for "Roof membrane VAXO (100, 115, 140, 160, 180 g/m²)" is 75.


Roof underlay Ventia Gold
22,37 kr / m² inc. VAT, excl. shipping (17,89 kr excl. VAT and shipping)
✔ Width: 1500mm ✔ Length: 50000mm ✔ Basis weight: 150 g/m² ✔ Thickness: 700 μm ✔ Sd: 0.02 m
Roof membrane, weight of about 150 g/m2, three-layered, diffusively open, with great water vapour permeability. Durable and aging resistant....

Ships within 5-7 business days after receipt of your payment

+

Minimum quantity for "Roof underlay Ventia Gold" is 75.

Add to wish list

EPS Roof & Floor SILVER (CS ≥ 80 kPa)
ab 20,26 kr / m² inc. VAT, excl. shipping (16,21 kr excl. VAT and shipping)
✔ Width: 500mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.037 ✔ Compressive stress by 10% relative deformation: 80 kPa ✔ Euroclass E
HOT DOTTED expanded polystyrene with a pigment protective filter, with enhanced insulation characteristics, designed for insulating roofs, ceilings and...

Minimum quantity for "EPS Roof & Floor SILVER (CS ≥ 80 kPa)" is 1.


Atlas SALTA | modified silicone paint
ab 712,53 kr / 10L inc. VAT, excl. shipping (570,03 kr excl. VAT and shipping)
✔ Silicone
Silicone paint Atlas Salta is highly resistant to fading, UV rays action and soiling. The use of pigments of the newest generation and advanced...

Minimum quantity for "Atlas SALTA | modified silicone paint" is 1.

Show more

Shown 12 out of 67