Atlas Postar 20 | quick-setting cement-based compound (10-80 mm)

61,08 kr / 25 kg inc. VAT, excl. shipping
(48,85 kr excl. VAT and shipping)
MAG-ATL-W-PS008-A0000-AT1A-2500

Ships within 10-12 business days after receipt of your payment

+

Additional products

Atlas ULTRAGRUNT | quick drying primer for critical substrates Atlas ULTRAGRUNT | quick drying primer for critical substrates 220,33 kr / 5kg inc. VAT, excl. shipping (176,25 kr excl. VAT and shipping)
+

Ships within 10-12 business days after receipt of your payment

  • Total cost 61,08 kr

Add to wish list

ATLAS POSTAR 20 - fast-drying cement subfloor (10 - 80 mm)

Creates subfloor of thickness 10 - 80 mm - the layer thickness depends on the structural arrangement (table below).
Recommended for use in residential and public access buildings.
Suitable for floor heating systems embedding -
does not require the use of plasticizing agents, conducts heat well.
Enables to execute slopes and to repair concrete surfaces, stairs, slabs, screeds.

The main characteristics

  • fast-drying - work can be continued after 5 days
  • foot traffic after 24 hours
  • limited linear shrinkage
  • high compressive strength: >20 N/mm²
  • for places exposed to permanent dampness

Types of finishing layers

  • ceramic and stone tiles, 
  • PVC flooring, 
  • carpet flooring, 
  • floor panels.

Types of possible arrangements

  • bonded floor - thickness 10 - 80 mm – substrate of good quality concrete, cement screed (with or without floor heating)
  • on separation layer - thickness 35 - 80 mm – when the substrate is of poor quality, not guaranteeing proper adhesion - dusty, cracked, oil soaked, dirty, very absorbable; the separation layer can consist of, e.g. PE foil 0.2 mm thick
  • floating - thickness 40 - 80 mm – installed onto thermal or acoustic insulation of: expanded polystyrene of proper hardness, floor hardened panels of mineral wool, etc.
  • heating – the layer thickness over the heating layer should be at least 35 mm

Properties

Fast-drying - the residual moisture content for subfloor thickness of 4 cm is reduced to less than 3% after 5 - 6 days from application (in standard conditions).
Thick plasticity - the mortar is easy to spread, float and allows to reach even surface (horizontal or with a slope).
Compressive strength: ≥ 20.0 N/mm2.
Flexural strength: ≥ 4.0 N/mm2.
Very low linear shrinkage - minimum changes in linear dimensions during drying (ca. 0.6 mm/rm) minimise the danger of cracking.

Consumption

The average consumption is 20 kg of mortar for 1 m² for each 10 mm of layer thickness.

Packaging

Paper bags: 25 kg
Pallet: 1050 kg in 25 kg bags

Video

(DE) Technische Daten (postar_20_td_de.pdf, 175 Kb) [Download]

(EN) Technical Data (postar_20_td_en.pdf, 235 Kb) [Download]

No posts found

Write a review

Also bought Also bought