Cart is empty
ATLAS ELASTYK- flexible adhesive (C2TE type). is manufactured as a dry mix of high quality cement binder, aggregates and special composition of modifiers. With improved bonding – minimum bonding to the substrate is 1.0 N/mm².
Recommended for heavy duty applications – involving difficult substrates or exposure to adverse weather conditions.
Ideal for coverings exposed to deformations – highly flexible, the adhesive compensates:
- thermal stress - on balconies, in underfloor or wall heating systems (ATLAS PLUS, an S1 class adhesive is recommended for use on terraces),
- mechanical stress – on plasterboards, gypsum or cement-bound particleboard, and damp proof membranes, such as WODER E or WODER DUO.
- Enables tile fixing to difficult substrates - e.g. terrazzo.
- good adhesion
- high flexibility
- for glazed tiles, terracotta, gres-porcelain tiles
- for floor and wall heating
- for difficult substrates – i.a. plasterboards
- extended open time
- bed thickness: 2 - 10 mm
- high adhesion: ≥ 1 N/mm²
- Types of surface: plastered and non-plastered walls of blocks, hollow brick, brick and cement and anhydrite screeds.
- Types of tiles: small, medium and large size ceramic (glazing tiles, terracotta, mosaic), cement, stoneware, etc. tiles.
Consumption
Average consumption: ca. 1.5 kg of dry mix / 1 m2 / 1 mm adhesive layer – for complete filling the space under the tile. It depends on the smoothness of the surface and the bottom side of the tile.
| Tile size | Trowel notch size [mm] |
Adhesive bed thickness [mm] |
Contact surface = 2/3 tile surface [kg/m2] |
Solid adhesive bed [kg/m2] |
| mosaic up to 2 x 2 cm |
4.0 | 2.0 | 2.0 | 3.0 |
| small format up to 10 x 10 cm |
4.0 – 6.0 | 3.0 | 3.0 | 4.5 |
| medium format up to 30 x 30 cm |
6.0 – 8.0 | 4.0 | 4.0 | 6.0 |
| large format more than 30 x 30 cm |
> 10.0 | 10.0 | 10.0 | 15.0 |
Packaging
Paper bags: 25 kg
Pallet: 1200 kg in 25 kg bags
No posts found
